Number of views:
1000
Gem polyurethane foam sealant
Retail price
0.0
元
Market price
0.0
元
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
1
Product description
Parameters
Product description
The ground foam polyurethane foam sealant adopts the former front foaming process,and the performance is more stable,with good temperature adaptability,88 times longer meter,dense cell structure,good elasticity,small shrinkage,no deformation,etc.,to ensure the construction quality,Effectively improve construction efficiency and save construction costs.The cured polyurethane foam has various effects such as caulking,bonding,sealing,heat insulation,sound absorption,etc.It is an environmentally friendly and energy-saving,easy-to-use building material that meets the green requirements of modern people and is deeply loved by consumers.
Application range
Suitable for the fixed bonding,filling and thermal insulation of various doors,windows and cabinets;the sealing,thermal insulation and thermal insulation of various pipelines;the sealing of the edges of the walls,roofs and enclosure panels;the fixing and bonding of indoors,Filling,insulation,etc.
Product properties
Specifications:Capacity 750mL;Weight:700g*15/900g*15
Shelf life:12 months
Product Features
Using the European pre-foaming process:80%of the foam has been foamed after spraying,which makes the construction personnel better,simpler and more convenient to use
Extended meter length
Dense cell structure
Good elasticity,small shrinkage,no deformation
Good temperature adaptation
Construction Program
Construction tool:Styrofoam gun
Construction steps:
1.Remove floating ash and oil on the surface before construction.Spray a little water on the construction surface when the humidity is below 50℃,otherwise heartburn and large holes will occur;
2.Shake the can evenly for 60 seconds before use,and then install the glue gun or nozzle to the can.The glue should always keep the can vertically down
3.Slowly apply glue in the gap from bottom to top from side to side,and fill up to 70%of the gap;
4.After the foam is cured,remove the excess foam;
5.The foam itself is not UV-resistant,so it is recommended to use other materials to coat the surface of the cured foam,such as silicone,plaster or paint(coating after 24 hours of construction).
Precautions
Before construction and curing,please avoid gas inhalation into the human body,which has certain irritation to eyes,skin and respiratory system.When cured,no effect
Avoid direct sunlight and store in a low-temperature,dry and ventilated environment
Cannot spray on flames or hot surfaces
The construction site should have a ventilated environment and should not be close to the fire source
Wear protective equipment during operation,and are not allowed to smoke or operate other equipment with a fire source
If the product touches the skin,please rinse with water;if the product touches the eyes,please rinse with water or follow the doctor's instructions
Please place the product out of the reach of children
Products must be placed upright during transportation and storage
Scan the QR code to read on your phone
Previous
Juhuan Styrofoam Series
CONTACT
Mainly produces polyurethane foam caulking agent, marble glue, AB stone dry hanging glue, plant glue, non-butyl rubber, cleaning agent, waterproof coating, etc
HOT LINE：
86-13573986900
Tel：+86-539-6372316
Fax：+86-539-6372381
E-mail：office@sdjuhuan.com
Add：Linyi City, Shandong Province, China
Http：//www.sdjuhuan.com / 居欢.com / 居欢.中国
Copyright © Shandong Juhuan New Material Technology Co., Ltd. 鲁ICP备15002516号 Powered by 300.cn