Shandong Juhuan New Material Technology Co., Ltd.
Your position:
The plastic foam glue gun
Number of views:

The plastic foam glue gun

Retail price
Market price
Number of views:
Product serial number
Product description
  1. Before Use: The foam tank reached up and down shake for 1 minute.
  2. The adapter is screwed into the tank
  3. When the injection starts to work, pressing the trigger and let the foam flow 10 seconds. The foam filled elongate tube. Drive out residual air.
  4. The needle is fixed to the nozzle.
  5. The flow control device with a new tank syringe should be kept upright when used.
  6. The output of the foam plate with the local regulator and flow control adjustment screw, if the adjustment screws tightened, the trigger is locked syringe Do not rotated three times or more to loosen the adjustment screw.
  7. tried to shake new replacement tank when the tank, remove the cans. Quickly (in less than a minute) fitted with the new structure of the foam tank
  8. The change can be made quickly in order to prevent bubble in hardening in the adapter.
  Replacing let hardening foam caked needle 9. If necessary.
  10. When cleaning foam gun, quickly remove the tank. The cleaning agent inverted spin to pull the trigger on a thorough cleaning foam gun adapter.
  Sclerosing foam before the mouth 11. The foam residue is removed by gun in this faction or the like. With a metal brush or a knife to clear long tube outside.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table


Mainly produces polyurethane foam caulking agent, marble glue, AB stone dry hanging glue, plant glue, non-butyl rubber, cleaning agent, waterproof coating, etc

Copyright © Shandong Juhuan New Material Technology Co., Ltd.       鲁ICP备15002516号      Powered by