Number of views:
Nesting fireproof foam
Number of views:
Product serial number
The special foam for the nesting fire protection project adopts the most advanced front foaming process,and the performance is more stable.Juhua foam products have good temperature adaptability,88 times longer meter,dense cell structure,good elasticity,small shrinkage,No deformation and other properties to ensure construction quality,effectively improve construction efficiency and save construction costs.The cured polyurethane foam has various effects such as caulking,bonding,sealing,heat insulation,sound absorption,etc.It is an environmentally friendly and energy-saving,easy-to-use building material that meets the green requirements of modern people and is deeply loved by consumers.
Suitable for fixed bonding,filling and heat preservation of various doors,windows and cabinets;sealing,heat insulation and heat preservation of various pipelines;wall,roof and enclosure panels
Edge sealing;fixing,bonding,filling,insulation,etc.in the room.
Installation of doors and windows:Sealing and fixed bonding between the doors and windows and the wall.
Advertisement model:production of model and sand table,repair of exhibition board.
Sound insulation and muffler:filling gaps in the decoration of speech room,broadcasting room,etc.,can play a role of sound insulation and muffler
Gardening and landscaping:flower arrangement,gardening and landscaping,light and beautiful.
Daily maintenance:repairing voids,gaps,wall tiles,floor tiles and floors.
Waterproof plugging:repairing leaks in tap water pipes and sewers,plugging.
Package and transportation:It is convenient to wrap valuable and fragile goods,save time and speed,and resist shock and pressure.
1.Before use,shake the can up and down for one minute.
2.Clean and moisten the construction surface before construction.
3.Connect the material tank upside down to the spray gun,turn counterclockwise to open the flow valve,and adjust the flow.
4.When spraying from bottom to top,the spray volume can be 1/2 of the required filling volume.
Five minutes after the foam starts to cure,the next step can be performed after 1 hour.
6.The cured foam can be removed with a sharp knife.Then the surface is treated with cement mortar,paint or silica gel.
Before construction and curing,please avoid gas inhalation into the human body,which has certain irritation to eyes,skin and respiratory system.When cured,no effect
Avoid direct sunlight and store in a low-temperature,dry and ventilated environment
Cannot spray on flames or hot surfaces
The construction site should have a ventilated environment and should not be close to the fire source
Wear protective equipment during operation,and are not allowed to smoke or operate other equipment with a fire source
If the product touches the skin,please rinse with water;if the product touches the eyes,please rinse with water or follow the doctor's instructions
Please place the product out of the reach of children
Products must be placed upright during transportation and storage
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Mainly produces polyurethane foam caulking agent, marble glue, AB stone dry hanging glue, plant glue, non-butyl rubber, cleaning agent, waterproof coating, etc